mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

All Technical Service Bulletins for Upper Side Moulding / Trim: > < Hood Sensor/Switch (For Alarm)|Locations|Page 5267
Page 1
background image

Upper Side Moulding / Trim: Customer Interest
Belt Line Molding - Corrosion

Bulletin No.: 007/97
Issued: 03/27/97
Revised:

Category
S

Applicable Model/s
1994-97 B-Series

Subject:
BELT LINE MOLDING CORROSION

APPLICABLE MODELS
1994-96 B-Series
1997 B-Series built before December 1, 1996

NOTE

Vehicle build month is located on the "Vehicle Certification" label attached to the driver's side B-pillar.

DESCRIPTION
The rear portion of the front beltline molding may appear corroded. Customers complaining of this appearance should have the moldings replaced with
new parts.

PARTS INFORMATION

WARRANTY INFORMATION
(Applies To Verified Customer Complaints On Vehicles Covered Under Normal Warranty. Refer To The SRT Microfiche For Warranty Term
Information).

Disclaimer

All Technical Service Bulletins for Upper Side Moulding / Trim: > < Hood Sensor/Switch (For Alarm)|Locations|Page 5267