B3000 4WD V6-3.0L OHV (1995)
6. Install all bolts hand-tight. Then tighten bolts in two steps in the order shown.
Tightening torques:
Step 1: 15 N-m (11 ft-lb)
Step 2: 26 N-m (19 ft-lb)
7. Install the cylinder head covers.
Tightening torque: 12 N-m (9 ft-lb)
8. Connect the heater hoses and upper radiator hose.
9. Connect the vacuum hoses to the pressure regulator.
10. Connect the fuel injector wiring harness.
11. Connect the engine coolant temperature sensor connector.
12. Connect the fuel supply and return lines.
13. Fill the radiator with specified coolant.
Upper intake manifold / Throttle body assembly
