B3000 4WD V6-3.0L OHV (1995)
Air Flow Meter/Sensor: Testing and Inspection
Caution:
^
Do not drop or subject the sensor to sharp shock.
^
Do not put or allow anything in the sensor.
INSPECTION
1. Disconnect the mass air flow sensor connector.
2. Remove the mass air flow sensor.
3. Check for damage of the sensor.
4. Reconnect the mass air flow sensor.
5. Disconnect the PCM connector.
6. Connect the SST (NGS) to the DLC.
7. Select the PID/DATA monitor and record function of the NGS.
8. If not as specified, replace the mass air flow sensor.