Clutch Release Cylinder Service and Repair | Page 3715
2. Using the black plastic bearing retainer rear edge as an indicator, take a reading with the clutch pedal fully up using Bearing Travel Gauge
D87T-4201-A, or equivalent.
3. Have an assistant fully depress the clutch pedal and take another measurement.
4. The difference between the two readings is the total bearing travel.
5. If the release collar travel is less than 1O.8mm {O.425 in} ,inspect the hydraulic system for leaks. If a leak is located in the system, replace the
worn or damaged component and bleed the system.
6. If no leak is found, bleed the system. Recheck the release collar travel after repairs.
Note The illustration shows how a tool may be fabricated locally.
