mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Instrument Panel, Gauges and Warning Indicators > < Cruise Control Switch|Page 4830
Page 1
background image

Cruise Control Switch: Service and Repair
Cruise Control Deactivator Switch

1. Disconnect the negative battery cable.

2. Disconnect the deactivator switch electrical connector.

WARNING:  Brake fluid contains polyglycol ethers and polyglycols. Avoid contact with eyes. Wash hands thoroughly after handling. If
brake fluid contacts eyes, flush eyes with running water for 15 minutes. Get medical attention if irritation persists. If taken internally,
drink water and induce vomiting. Get medical attention immediately. Failure to follow these instructions may result in personal injury.

CAUTION:  Brake fluid is harmful to painted and plastic surfaces. If brake fluid is spilled onto a painted or plastic surface, immediately wash it
with water.

3. Remove the deactivator switch.
4. To install, reverse the removal procedure.

1. Bleed the brake system. See BRAKE SYSTEM BLEEDING.

Instrument Panel, Gauges and Warning Indicators > < Cruise Control Switch|Page 4830