B3000 DS Cab Plus 2WD V6-3.0L OHV (2001)
Intake Manifold: Service and Repair
Lower Intake Manifold
1. Disconnect the negative battery cable.
2. Drain the engine cooling system.
3. Remove both valve covers.
4. Disconnect the radio ignition interference capacitor, ignition coil and EGR solenoid connections.
5. Remove the ignition coil and plug wires as an assembly.
6. Disconnect the crankshaft position sensor (CKP) sensor, engine coolant temperature (ECT) sensor, water temperature indicator sender unit, fuel
injectors and camshaft synchronizer connections.
7. Relieve the fuel pressure and disconnect the fuel line. See PUSH CONNECT FITTINGS.
8. Remove the fuel rail and the fuel injector as an assembly.
