B3000 DS Cab Plus 2WD V6-3.0L OHV (2001)
1. Install the special tool on the camshaft synchronizer by rotating the tool until it engages the notch in the camshaft synchronizer housing and the
armature.
NOTE: During installation, the arrow on the special tool will rotate clockwise until the oil pump intermediate shaft and the camshaft gear
engages.
2. Install the camshaft synchronizer housing assembly so the arrow on the special tool is 38 degrees from the centerline of the engine.
3. Install the bolt.
4. Install the camshaft position (CMP) sensor.