B3000 DS Cab Plus 2WD V6-3.0L OHV (2001)
replace both the differential case and the differential bearings.
32. Measure the differential case runout without the ring gear.
1. Rotate the differential case.
2. Check and note the differential case runout.
Note: If runout is now within specification, use new differential bearings for assembly. If runout is still excessive, the axle housing is damaged
and must be replaced.
33. Recheck runout with the new differential case and differential bearings.
1. Rotate the differential case.
2. Recheck and note the differential case runout.
34. Assemble the axle.
35. Install the front axle assembly.
36. Fill the axle assembly with axle lubricant meeting specification API Service GL-5.