B3000 DS Cab Plus 2WD V6-3.0L OHV (2001)
Transmission Position Switch/Sensor: Service and Repair
DIGITAL TRANSMISSION RANGE SENSOR REMOVAL / INSTALLATION
Removal Note
Note: When the battery has been disconnected and reconnected, some abnormal drive symptoms can occur while the vehicle relearns its adaptive
strategy. The customer needs to be notified that they may experience slightly different upshifts either soft or firm and this is a temporary condition and
will eventually return to normal operating condition.
1. Disconnect the negative battery cable.
2. Raise and support the vehicle.
3. Disconnect the shift cable from the manual control outer lever.
4. Disconnect the digital transmission range (TR) sensor electrical connector.
5. Remove the manual control outer lever nut and manual control outer lever
6. Remove the bolts and the digital TR sensor.
Installation Note
