B3000 DS Regular Cab 2WD V6-3.0L OHV (2002)
7. Remove the valve cover gasket, if required.
8. Install in the reverse order of removal.
Valve Cover LH Installation
1. Clean all mating surfaces.
2. Apply a bead of silicone in two places where the cylinder head and lower intake manifold meet.
Caution: Do not clean the valve cover gasket with solvent. Damage to the valve cover gasket may occur.
3. If removed, install the valve cover gasket.
4. Install the valve cover.
^
Position the valve cover.
^
Tighten the three bolts and five stud bolts in the sequence shown.
