B3000 DS Regular Cab 2WD V6-3.0L OHV (2002)
Vacuum Reservoir HVAC: Service and Repair
VACUUM RESERVOIR TANK AND BRACKET REMOVAL/INSTALLATION
NOTE: The vacuum reservoir tank and bracket is located either on or beneath the RH front fender splash shield
1. Remove the engine air cleaner (ACL).
2. Remove the RH front fender splash shield. See SPLASH SHIELD REMOVAL/INSTALLATION.
3. Remove the nuts and remove the A/C vacuum reservoir tank and bracket.
4. Disconnect the vacuum supply and outlet hoses.
5. To install, reverse the removal procedure.
Tightening Torque
7 - 9 N.m {71 - 92 kgf.cm, 62 - 79 in.lbf}.