B3000 DS Regular Cab 2WD V6-3.0L OHV (2002)
7. Remove the fuel rail.
-
Remove the four bolts.
-
Remove the fuel rail and fuel injectors as assembly.
8. Remove the fuel injectors.
Installation Note
CAUTION: Never use silicone grease. It will clog the fuel injectors. Make sure the injector end caps are clean and free on contamination.
1. Inspect the two O-ring seals from each fuel injector. Install new O-ring seals as needed.
2. Install the fuel injectors.
-
Lubricate the O-rings with clear engine oil.
3. Install the fuel rail.