B3000 DS Regular Cab 2WD V6-3.0L OHV (2002)
Fluid - M/T: Service and Repair
TRANSMISSION OIL REPLACEMENT
1. Remove the drain plug and washer.
2. Drain the oil into a suitable container.
3. Install a new washer and the drain plug.
Tightening Torque 40 - 50 Nm (4.1 - 5.7 kgf-cm, 30 - 42 ft. lbs.)
4. Remove the oil level plug with washer and add the specified amount and type of oil through the oil level plug hole until the level reaches the
bottom of the oil level plug hole.
Specified oil grade: MERCON(R) or M-III
Capacity: 2.65 liters 15.6 US pints, 4.5 Imp pints
5. Install a new washer and the oil level plug.
Tightening torque 40 - 58 Nm (4.1 - 5.7 kgf-m, 30 - 42 ft. lbs.)
