B3000 SE Cab Plus 4 2WD V6-3.0L OHV (2001)
7. If required, remove the throttle body gasket.
8. If required, remove the idle air control (IAC) valve and IAC valve gasket.
9. If required, remove the TP sensor.
Installation Note
1. If the TP sensor was removed, install the TP sensor.
2. If the IAC valve was removed, install the AC valve gasket and IAC valve.
3. If the throttle body gasket was removed, install a new throttle body gasket.
4. Install the throttle body.
5. Connect the accelerator cable and cruise control actuator cable.
6. Connect the IAC valve and TP sensor connectors.
7. Install the snow shield and bolts.
8. Install the air cleaner outlet tube.