B3000 SE Cab Plus 4 4WD V6-3.0L OHV (2000)
2.
Determine if the upper striker bar must meets the center of the door locking-latch mechanism.
^
If striker bar and locking-latch mechanism meet correctly, perform additional diagnostics to determine the source of the noise. See Workshop
Manual (section 09-01I TROUBLESHOOTING [BODY SYSTEMS]).
^
If striker bar and locking-latch mechanism DO NOT meet correctly, proceed to STEP 3.
3.
Correctly position striker bar by lightly tapping it with a rubber/plastic mallet as necessary.
4.
Verify repair.
WARRANTY INFORMATION
Note:
^ This information applies to verified customer complaints on vehicles covered under normal warranty. Refer to the SRT microfiche for warranty
term information.
