B3000 SE Cab Plus 4 4WD V6-3.0L OHV (2000)
Power Locks: Service and Repair
1. Disconnect the negative battery cable.
2. Remove the front door trim panel.
3. Remove the watershield.
4. Remove the center door glass run retainer.
Electrical Connector Removal Note
1. Disconnect the front door ajar warning switch and power door lock actuator connector, if equipped.
2. Position the door lock aside.
Inside Door Handle Cable Removal Note
1. Remove the inside door handle cable watershield.
2. Remove the cable conduit (2) from the door lock.
