B3000 SE Cab Plus 4 4WD V6-3.0L OHV (2000)
Seat Back: Service and Repair
1. Disassemble the front bucket seat.
2. Unhook the seat back trim cover retainer.
CAUTION: Use care when separating the seat back trim cover from the hook and loop strips, or the hook and loop strips may be torn from the
seat back foam.
3. Disengage the hook and loop strips and remove the seat back trim.
CAUTION: Use care when removing the seat back padding because it may be attached to the seat back frame with adhesive.
4. Remove the seat back padding from the seat back frame.
5. Remove the plastic bag.
6. Remove the cable ties.
7. Remove the lumbar support adjusting cable.
1. Flex the lumbar support.
2. Unhook the lumbar support adjusting cable from the lumbar support.
3. Unhook the lumbar support adjusting cable from the positioning bracket.
4. Remove the lumbar support adjusting cable.
