B3000 SE Cab Plus 4 4WD V6-3.0L OHV (2000)
13. Carefully install the secondary piston assembly and stop bolt.
14. Carefully install the primary piston assembly and snap ring.
15. Install the brake pressure control valve.
Tightening torque:
Bolts and Nuts: 13 - 22 Nm (1.3 - 2.2 kg-m, 10 - 16 ft. lbs.)
16. Fill brake pressure switch with appropriate brake fluid and install on cylinder, if equipped.
Tightening torque:
Bolts and Nuts: 14 - 20 Nm (1.4 - 2.0 kg-m, 11 - 14 ft. lbs.)
17. Install the brake master cylinder reservoir.
Note Bleed the brake master cylinder prior to installation; refer to Brake Bleeding; Service and Repair.
18. Install the brake master cylinder; refer to Removal and Installation.
19. Fill the brake master cylinder reservoir and install the brake master cylinder filler cap.
20. Bleed the brake system; refer to Brake Bleeding; Service and Repair.
