B3000 SE Cab Plus 4 4WD V6-3.0L OHV (2000)
Valve Cover: Service and Repair
VALVE COVER-RH REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Disconnect the ignition coil connector.
3. Disconnect the spark plug wires from the RH spark plugs and position aside.
4. Disconnect the Intake Air Temperature (IAT) sensor connector.
5. Disconnect the Mass Airflow (MAF) sensor connector and position engine harness aside.
6. Disconnect the vacuum line.
7. Remove the ignition coil bracket.
