B3000 SE Cab Plus 4 4WD V6-3.0L OHV (2000)
LFC 27 / DTC B1884 (Step 6)
Normal Operation
The air bag diagnostic monitor has the ability to deactivate the passenger-side air bag under certain conditions. When the passenger air bag is
deactivated, the passenger air bag deactivation (PAD) switch warning lamp will be illuminated.
The air bag diagnostic monitor monitors the PAD switch warning lamp for open or short to ground conditions. If the air bag diagnostic monitor detects
an open or short to ground condition on the PAD switch warning lamp circuit, it will store a diagnostic trouble code (DTC) B1884 in memory and flash a
lamp fault code (LFC) 27 (or higher priority code if one exists) on the air bag indicator.
Possible Causes
-
An open or short to ground on (Y/LG) wire.
-
A damaged or burned out PAD indicator.
-
A damaged or inoperative PAD lamp.
-
A damaged or inoperative air bag diagnostic monitor.
-
A blown I/P fuse panel fuse.
