B3000 SE Cab Plus 4 4WD V6-3.0L OHV (2000)
3. Install a new seal on the power steering pressure fitting by stretching the seal over the Seal Replacer Set 211-D027 (D9OP-3517-A) or equivalent
until it is large enough to slip over the threads of the fitting.
4. Install the power steering pressure hose.
Tightening torque 48 Nm (4.9 kgf-m, 35 ft. lbs.)
5. Install the pump pulley.
6. Fill, purge and leak check the system.
