B3000 SE Cab Plus 4 4WD V6-3.0L OHV (2000)
3. Preload the torsion bar.
1. Install SST 200185 torsion bar tool and adapters.
2. Tighten the SST until the new adjustment bolt and nut can be installed.
3. Turn the adjustment bolt until the preliminary adjustment measurement is reached (the recorder length of the old adjustment bolt).
4. Install the torsion bar cover plate.
1. Position the cover plate.
2. Install the mounting bolts.
5. Lower the vehicle.
6. Check the ride height.
7. Check the alignment.
