B3000 SE Cab Plus 2WD V6-3.0L OHV (1998)
Parking Lamp: Service and Repair
1. Pull out the parking lamp assembly.
1. Remove the screws.
2. Pull out the parking lamp assembly.
2. Remove the parking lamp assembly.
1. Disconnect the three connectors.
2. Remove the parking lamp assembly.
3. Install in reverse order of removal.
Tightening torque: 1.7 - 2.1 N.m (17.3 - 21 kgf.cm, 15 - 18 in.lbf)