B3000 SE Regular Cab 2WD V6-3.0L OHV (2002)
Brake Master Cylinder: Adjustments
1. Remove the brake master cylinder.
Caution: Do not apply the brake pedal with the master cylinder removed from the booster.
2. Adjust the power brake booster to brake master cylinder push rod, vacuum applied.
^
Measure the power brake booster to brake master cylinder push rod.
^
If necessary, adjust the screw to the proper length.
24.89 - 25.27 mm (0.98 - 0.995 in.)
3. Install the brake master cylinder.