B3000 SE Regular Cab 2WD V6-3.0L OHV (2002)
Fan Clutch: Service and Repair
COOLING FAN AND CLUTCH REMOVAL / INSTALLATION
1. Remove in order shown in figure.
Removal Note
The nut which attaches the clutch to the water pump shaft has a left-hand thread and must be rotated clockwise for removal.
Installation Note
The nut which attaches the clutch to the water pump shaft has a left-hand thread and must be rotated counterclockwise for installation.
1. Install in reverse order of removal.
Tightening torque -- Fan Shroud 6 - 8 Nm (61 - 82 kgf-cm, 54 - 70 inch lbs.)
