B3000 SE Regular Cab 2WD V6-3.0L OHV (2002)
Front Engine Plate: Service and Repair
FRONT COVER REMOVAL / INSTALLATION
Removal
1. Disconnect the negative battery cable.
2. Drain the engine coolant.
3. Remove the drive belt.
4. Remove the fan and shroud.
5. Remove the water pump pulley.
6. Disconnect the radiator lower hose at the water pump outlet.
7. Remove the crankshaft vibration damper.
8. Remove the oil pan.
9. Remove the crankshaft position (CKP) sensor.
10. Remove the engine front cover and the water pump as an assembly.
1. Remove the bolts.
