B3000 SE Regular Cab 2WD V6-3.0L OHV (2002)
Cylinder Head Gasket: Service and Repair
CYLINDER HEAD GASKET REMOVAL / INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the lower intake manifold.
3. Remove the A/C compressor.
4. Remove the generator.
5. Remove the power steering pump.
6. Remove the generator mounting bracket.
7. Remove the two bolts from the rear of the A/C compressor mounting bracket.
8. Remove the bolts and remove the A/C compressor mounting bracket.
9. Raise the vehicle on a hoist.
10. Remove the exhaust manifolds.
11. Remove the bolts.
