B3000 SE Regular Cab 2WD V6-3.0L OHV (2002)
A. Pry upward on the plastic retainer as indicated, while sliding the switch away from the key insertion end.
6.
Install a new Key-In-Ignition warning chime switch.
7.
Reinstall the ignition cylinder to the steering column.
8.
Connect the negative battery terminal.
9.
Set customer radio station presets.
10.
Verify repair.
PART(S) INFORMATION
WARRANTY INFORMATION
NOTE:
This information applies to verified customer complaints on vehicles covered under normal warranty. Refer to the SRT microfiche for warranty term
information.
