B3000 SE Regular Cab 2WD V6-3.0L OHV (2002)
5. Measure and adjust the clutch air gap by removing or adding A/C clutch hub spacers.
6. Remove the A/C clutch and remove A/C clutch hub spacer.
1. Thread an 8 x 1.25 mm bolt into the A/C clutch to force it from the compressor shaft.
2. Lift the A/C clutch and the A/C clutch hub spacer from the compressor shaft.
7. Remove the pulley snap ring.
8. Remove the A/C clutch pulley.
CAUTION: Do not use air tools. The A/C clutch field coil can be easily damaged.