B3000 SE Regular Cab 2WD V6-3.0L OHV (2002)
8. Affach the restraint system diagnostic tool to the vehicle harness side of the passenger air bag module electrical connector.
9. Connect the negative battery cable.
10. With the restraint system diagnostic tools installed at all deployable devices prove out the supplemental restraint system (SRS).
11. Disconnect the negative battery cable and wait at least one minute.
Reactivation
Warning : To reduce the risk of serious personal injury, read and follow all warnings, cautions, and notes at the beginning of the deactivation
procedure.
1. Disconnect the negative battery cable and wait at least one minute.
2. Remove the restraint system diagnostic tool from the vehicle harness side of the passenger air bag module electrical connector.
3. Connect the passenger air bag module electrical connector.
4. Close the glove compartment door.
