B3000 SE Regular Cab 2WD V6-3.0L OHV (2002)
2. Remove the lower steering column shroud.
8. Remove the ignition switch lock cylinder (11582).
1. Position the ignition switch lock cylinder to the RUN position.
2. Using a suitable tool, push upward on the cylinder release tab while pulling the ignition switch lock cylinder outward.
9. Position the upper steering column shroud up enough to access the clockspring retaining clips.
10. Remove the passive anti-theft system (PATS) transmitter.
1. Remove the PATS transmitter retaining screw.
2. Position the PATS transmitter out of the way.
11. Remove the key-in-ignition warning indicator switch.
