B3000 SE Regular Cab 2WD V6-3.0L OHV (2002)
20. Install the driver air bag module.
1. Connect the driver air bag module electrical connector.
2. Position the driver air bag module into the steering wheel.
21. Install the two driver air bag module bolts.
1. Install the two steering wheel back cover plugs.
22. Restore the vehicle to operating condition.
WARNING: To reduce the risk of serious personal injury, read and follow all warnings, cautions, notes, and instructions in the
supplemental restraint system (SRS) deactivation/reactivation procedure.
1. Reactivate the supplemental restraint system (SRS). See SUPPLEMENTAL RESTRAINT SYSTEM (SRS) DEACTIVATION AND
REACTIVATION.
WARNING: The restraint system diagnostic tool is for restraint system service only. Remove from the vehicle prior to road use.
Failure to remove could result in injury and possible violation of vehicle safety standards.
2. With all the restraint system diagnostic tools removed, prove out the supplemental restraint system (SRS). See SUPPLEMENTAL
RESTRAINT SYSTEM (SRS) DEACTIVATION AND REACTIVATION.
