B3000 SE Regular Cab 2WD V6-3.0L OHV (2002)
Seat Belt Retractor: Service and Repair
Rear Seat Belt Retractor
2 - Door
REAR SEAT RETRACTOR (2-DOOR) REMOVAL / INSTALLATION
1. Remove the lower rear seat trim panel from the rear seat. See REAR SEAT-CENTER FACING REMOVAL/INSTALLATION.
2. Remove the bolt (1).
3. Remove the retractor (2).
4. Install in reverse order of removal.
5. Check for proper operation. See SEAT BELT INSPECTION.
4 - Door
REAR SEAT RETRACTOR (4-DOOR) REMOVAL / INSTALLATION
1. Remove the inboard and outboard anchor trim cover from the rear seat. See REAR SEAT - FOUR DOOR, SUPERCAB REMOVAL /
INSTALLATION.
2. Remove the bolt (1).
3. Remove the retractor (2).
4. Install in reverse order of removal.
5. Check for proper operation. See SEAT BELT INSPECTION.