B3000 SE Regular Cab 2WD V6-3.0L OHV (2002)
Wheel Speed Sensor: Service and Repair
Front Wheel Speed Sensor
FRONT SPEED SENSOR (4X2) REMOVAL / INSTALLATION
1. Raise and support the vehicle.
2. Disconnect the speed sensor electrical connector and unclip the front speed sensor wire from the vehicle frame.
3. Remove the bolt and speed sensor.
4. Install in reverse order of removal.
Tightening torque 11 - 13 Nm (1.1 -1.3 kgf m, 9 - 10 ft. lbs.)
