B3000 SE Regular Cab 2WD V6-3.0L OHV (2002)
4) Tighten the servo cover bolts in the sequence shown.
9. Install the (1) oil strainer.
10. Install the (2) bolt.
11. Position a new oil pan gasket on the transmission fluid pan.
12. Install and align the oil pan.
^
Loosely install the 18 oil pan bolts.
13. Tighten the oil pan bolts.
^
Use a crisscross sequence to tighten the oil pan bolts.
14. Lower the vehicle.
Note: When the battery has been disconnected and reconnected, some abnormal drive symptoms can occur while the vehicle relearns its adaptive
strategy. The customer needs to be notified that they may experience slightly different upshifts either soft or firm and this is a temporary condition
