mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Recall - Cruise Control Cable/Throttle Binding|Page 5702 > < Recall 99V062002: Cruise Control Cable/Throttle Binding|Page 5693
Page 1
background image

Technical Service Bulletin # 80906

Date: 990621

Dealer Letter

To: All Mazda Dealers

Attention: All General Managers, Service Managers and Parts Managers

Subject:
Recall Campaign # 80906

1998-1999 B-Series - Cruise Control Cable

Dear Mazda Dealer:

Mazda Motor Corporation has determined that a defect, which relates to motor vehicle safety, exists in certain 1998-1999 B-Series trucks with factory
cruise control.

The cruise control cable may interfere with the cruise control servo pulley and not allow the throttle to return to idle when disengaging the cruise control.
If the cruise control is used and the failure occurs, it could result in a stuck throttle, with the potential for an accident. This condition will not occur if the
cruise control is not being used.

Owners of affected vehicles will be notified by mail on June 21, 1999 to inform them that the replacement speed control cables are available and request
that they contact a Mazda dealership for an appointment to have the speed control cable inspected and/or replaced. Detailed information regarding this
Recall Campaign is provided in Attachment I. The inspection/replacement procedure is identified in Attachment II and the letter sent to the owners of the
subject vehicles are included in Attachment III.

Please also notify any customers that may have purchased a Mazda Accessory Cruise Control kit from your dealership, and arrange an appointment to
have the inspection or installation performed.

The National Traffic and Motor Vehicle Safety Act prohibits selling or leasing any subject vehicles without performing the necessary repair for defects
or failures. Therefore, we request that you have the necessary work completed for all vehicles in your inventory prior to sale or lease.

Please make certain that the appropriate personnel in your dealership are familiar with the details of this recall campaign for responding to customer
inquiries. Should you have any questions, you may contact your District Customer Support Manager.

We apologize for any inconvenience this program may cause you and your personnel. Your understanding and support in carrying out this campaign is
greatly appreciated.

Attachment I

CONDITION OF CONCERN

The cruise control cable may interfere with the cruise control servo pulley and not allow the throttle to return to idle when disengaging the cruise control.
If the cruise control is used and the failure occurs, it could result in a stuck throttle, with the potential for an accident. This condition will not occur if the
cruise control is not being used.

SUBJECT VEHICLES

Model Year & Model

Production Range

1998-1999 B-Series Trucks with factory cruise control

January 5, 1998 - March 4, 1999

OWNER NOTIFICATION

Mazda will notify owners of subject vehicles in two mailings. An interim mailing was sent to customers on May 7, requesting that they do not use their
cruise control. On June 21, 1999 customers will receive a letter informing them that the parts are now available and will be requesting that they make an
appointment with a Mazda dealer to have the cruise control cable inspected and or replaced.

REPAIR PROCEDURES

Please refer to Attachment II.

PARTS INFORMATION

Campaign labels are supplied at no charge and are available in 8-1/2" X 11" sheets containing 18 labels. Please use M-Net for ordering additional labels.

Based on your retail sales, replacement cruise control cables will be shipped to your dealer with an upcoming stock order.

Recall - Cruise Control Cable/Throttle Binding|Page 5702 > < Recall 99V062002: Cruise Control Cable/Throttle Binding|Page 5693