B3000 SE Regular Cab 4WD V6-3.0L OHV (1998)
Ignition Coil Pack: Service and Repair
Ignition Coil Removal / Installation
1. Disconnect the battery ground cable.
2. Disconnect the fuel charging wiring.
3. Remove the spark plug wires.
4. Remove the bolts and remove the ignition coil.
NOTE: Wipe the coil towers with a clean cloth dampened with soap and water.
5. Install in reverse order of removal.
Tightening torque
5-7 Nm (51-71 kgf/m 44-66 in.lbs.).