B3000 SE Regular Cab 4WD V6-3.0L OHV (1998)
Electronic Brake Control Module: Service and Repair
4WABS Control Module
REMOVAL / INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the three mounting bolts.
Tighten torque: 1 - 2 Nm (9 - 17 inch lbs.)
3. Disconnect the two electrical connectors.
4. Remove the 4 bolts and control module.
Tighten torque: 7 - 9 Nm (63 - 79 inch lbs.)
5. Install in reverse order of removal.
