B3000 TL Cab Plus 4 2WD V6-3.0L OHV (2000)
1. Install the three bolts and the three stud bolts.
^
Tighten the bolts in the sequence shown in two steps.
^
Tighten to 20 Nm (2 kgf.m, 14 ft. lbs.).
^
Tighten to 25 Nm (2.6 kgf.m, 18 ft. lbs.).
Mazda Workshop Service and Repair Manuals
Lamps and Indicators - Engine >
< Lower Intake Manifold|Page 1189
Page 4
