B4000 V6-4.0L SOHC (2005)
NOTE:
-
If the safety belt guide cover is damaged or if it does not remain closed, install a new cover.
-
Safety belt guide cover removed for clarity.
6. Remove the front safety belt guide cover.
-
Release the tabs and remove the cover.
7. Remove the bolt and safety belt guide.
-
Use the safety belt bolt bit to remove the bolt.
Tightening Torque: 40 Nm (4.1 kgf-m, 30 ft-lbf)
8. Disconnect the safety belt anchor.
1. Use the Safety Belt Bolt Bit to remove the bolt.
2. Disconnect the safety belt anchor.
Tightening Torque: 40 Nm (4.1 kgf-m, 30 ft-lbf)