B4000 V6-4.0L SOHC (2005)
3
Install the long brake shoe retracting spring.
Adjuster Screw Installation
Note: To prevent incorrect installation, the socket end of each brake adjuster screw is stamped R or L.
1. Assemble the brake adjuster screw assembly.
1
Apply grease or an equivalent silicone compound.
2
Install the brake adjuster screw into the brake shoe adjusting screw nut to the end of the threads, and then loosen one-half turn.
3
Install the brake shoe adjusting screw socket on the brake shoe adjusting screw nut.
2. Install the brake adjuster screw assembly.
1
Position the brake adjuster screw assembly.
2
Install the brake shoe adjusting screw spring.
3
Position the brake shoe adjusting lever cable.
4
Position the adjusting lever return spring and the brake shoe adjusting lever.
5
Hook the brake shoe adjusting lever cable to the brake shoe adjusting lever.
3. Test the operation of the automatic self-adjuster.
1
Pull the brake shoe adjusting lever cable and check that the brake shoe adjusting lever rotates the brake shoe adjuster assembly.
2
Release the brake shoe adjusting lever cable and check that the brake shoe adjusting lever advances to the next notch on the brake shoe
adjusting screw nut.
