B4000 V6-4.0L SOHC (2005)
Installation
1. NOTE: Lubricate the parts with clean engine oil before installing.
Install the camshaft.
2. NOTE:
^
The camshaft bearing caps must be installed in their original position.
^
After installing the bolts, check the camshaft for free rotation.
Position the oil supply tube, the camshaft bearing caps, and the bolts.
^
Tighten the bolts in the sequence shown in two stages:
^
Stage 1: Tighten the bolts to 6 Nm (53 inch lbs.).
^
Stage 2: Tighten the bolts to 16 Nm (12 ft. lbs.).
3. The camshaft must be re-timed.
4. Install the camshaft roller followers.
