B4000 V6-4.0L SOHC (2005)
9. Disconnect the lower radiator hose at the water pump.
1. Release the clamp.
2. Remove the hose.
10. Remove the water pump pulley.
11. Remove the water pump.
12. Clean all the sealing surfaces.
13. Install in reverse order of removal, referring to Installation Note.
Water Pump Gasket Installation Note
Caution:
^
Use care when scraping the water pump-to-engine block mating surfaces. Gouges in the aluminum could form leak paths.
Steps After Procedure
1. Connect negative battery cable.
2. Fill radiator with specified amount and type of engine coolant and bleed the cooling system.
