B4000 V6-4.0L SOHC (2005)
1. Install the digital TR sensor.
1
Position the digital TR sensor.
2
Loosely install the bolts.
Note:
^
The manual lever must be in neutral.
2. Adjust the digital TR sensor.
1
Install SST into the three slots on the digital TR sensor.
2
Tighten the bolts.
3. Install the manual control outer lever.
1
Install the manual control outer lever.
2
Install the manual control outer lever nut.
4. Connect the TR sensor electrical connector.
5. Connect the shift cable to the manual control outer lever.