B4000 V6-4.0L SOHC (2005)
Shift Interlock Solenoid: Service and Repair
SHIFT LOCK ACTUATOR REMOVAL / INSTALLATION
1. Remove the steering column assembly.
2. Remove the insert plate and the shift lock actuator.
1
Remove the bolts.
2
Remove the insert plate and the shift lock actuator.
Note:
^
The shift lock actuator clip is an assembly aid for the assembly plant and does not need to be replaced.
3. Remove the insert plate from the shift lock actuator.
^
Remove and discard the shift lock actuator clip.
4. Install in reverse order of removal.