Torque Converter Clutch Solenoid Service and Repair
7. Remove the solenoids.
1
Remove the wire harness.
2
Remove the solenoid clamp bolts.
3
Remove the solenoid clamp.
4
Remove the appropriate solenoid(s).
Installation Note
1. Install the new solenoid(s).
1
TCC
2
SS4/CCS
3
SS2
4
EPC
5
SS3
6
SS1
Caution: The solenoid clamp must be installed in the TCC and EPC solenoid grooves, shift solenoid pockets and the No. 204 plug.
2. Install the solenoid clamp.
1
Position the solenoid clamp on the main control valve body.
2
Install the solenoid clamp bolts.
3. Connect the six solenoid electrical connectors.