B4000 V6-4.0L SOHC (2005)
Seals and Gaskets: Service and Repair
Automatic Transmission Extension Housing and Gasket Removal / Installation
AUTOMATIC TRANSMISSION EXTENSION HOUSING AND GASKET REMOVAL / INSTALLATION
Removal
1. With the vehicle in NEUTRAL, position it on a hoist.
Note:
^
To maintain initial driveshaft balance, mark the rear driveshaft yoke and axle flange so they can be installed in their original alignment.
2. Mark the rear driveshaft.
3. Remove the rear driveshaft.
1
Remove the bolts.
2
Remove the rear driveshaft.