B4000 V6-4.0L SOHC (2005)
Transmission Speed Sensor: Service and Repair
Intermediate Shaft Speed (ISS) Sensor Removal / Installation
INTERMEDIATE SHAFT SPEED (ISS) SENSOR REMOVAL / INSTALLATION
1. Raise and support the vehicle.
2. Disconnect intermediate shaft speed (ISS) sensor electrical connector.
3. Remove ISS sensor.
1
Remove the screw.
2
Remove the ISS sensor from the transmission.
3
Inspect the ISS sensor O-ring for damage. If damaged, install a new O-ring.
4. Inspect and lubricate O-ring with petroleum jelly.
1
Install the ISS sensor into the transmission.
2
Tighten the ISS sensor screw.