B4000 V6-4.0L SOHC (2005)
10. Remove the transmission case (16 pin) electrical connector retaining spring.
Caution:
^
Do not damage the connector or harness.
11. Remove the transmission case (16 pin) electrical connector.
1
Compress the tabs on the transmission case (16 pin) electrical connector.
12. Push the transmission case (16 pin) electrical connector out of transmission case.
Installation Note
Note:
^
Make sure the tab is in the lock position.
Install new O-rings on the transmission case (16 pin) electrical connector.
1. Install the transmission case (16 pin) electrical connector.
1
Lubricate the transmission case (16 pin) electrical connector O-rings with petroleum jelly.
Caution: Align the slot on the TSS sensor electrical connector with the slot In the 16 pin case connector.
