B4000 V6-4.0L SOHC (2005)
9. Use the special tool to prevent the flange from turning. Install the new washer and the new nut.
Caution:
^
Align the index marks.
Note:
^
Install the driveshaft with new bolts. If new bolts are not available, coat the threads of the original bolts with Threadlock and sealer.
10. Connect the driveshaft to the transfer case and install the bolts.
11. Check, and if necessary, fill the transfer case to the correct level with the specified fluid.
12. Lower the vehicle.
